Shop – CONTROLLINO https://www.controllino.com Industrial PLCs | 100% Arduino-compatible Sat, 02 Dec 2023 18:19:20 +0000 en-US hourly 1 https://wordpress.org/?v=6.4.1 https://www.controllino.com/wp-content/uploads/2023/05/cropped-C_Logo_Filled_RGB-1-32x32.png Shop – CONTROLLINO https://www.controllino.com 32 32 CONTROLLINO MICRO (CAN) https://www.controllino.com/product/controllino-micro-can/ Thu, 13 Jul 2023 07:37:15 +0000 https://page2023.controllino.com/?post_type=product&p=5573
  • Microcontroller: 32-Bit (RP2040)
  • 18x I/Os in a minimal form factor
    • 6x Analog Inputs (24 Bits resolution)
    • 4x Analog or Digital Inputs (12 Bits resolution)
    • 8x Outputs (Half Bridge, max. 3A per channel, PWM)
      • Built-in Current Sensor for output current monitoring
      • Adjustable output current limit from 0.5A to 3A
  • Cryptography: ECC608 Crypto Chip
  • Communication: CAN
  • Networking: Ethernet Port with W5500 from Wiznet
    • ]]>     The MICRO is our first product with a 32 bit microcontroller, and is fully packed with the following features:

    • Microcontroller: 32-Bit (RP2040)
    • 18x I/Os in a minimal form factor
      • 6x Analog Inputs (24 Bits resolution)
      • 4x Analog or Digital Inputs (12 Bits resolution)
      • 8x Outputs (Half Bridge, max. 3A per channel, PWM)
        • Built-in Current Sensor for output current monitoring
        • Adjustable output current limit from 0.5A to 3A
    • Cryptography: ECC608 Crypto Chip
    • Communication: CAN
    • Networking: Ethernet Port with W5500 from Wiznet
    ]]>         CONTROLLINO MICRO (RS485) https://www.controllino.com/product/controllino-micro-rs485/ Tue, 11 Jul 2023 13:56:25 +0000 https://page2023.controllino.com/?post_type=product&p=5510
  • Microcontroller: 32-Bit (RP2040)
  • 18x I/Os in a minimal form factor
    • 6x Analog Inputs (24 Bits resolution)
    • 4x Analog or Digital Inputs (12 Bits resolution)
    • 8x Outputs (Half Bridge, max. 3A per channel, PWM)
      • Built-in Current Sensor for output current monitoring
      • Adjustable output current limit from 0.5A to 3A
  • Cryptography: ECC608 Crypto Chip
  • Communication: RS485
  • Networking: Ethernet Port with W5500 from Wiznet
    • ]]>     The MICRO is our first product with a 32 bit microcontroller, and is fully packed with the following features:

    • Microcontroller: 32-Bit (RP2040)
    • 18x I/Os in a minimal form factor
      • 6x Analog Inputs (24 Bits resolution)
      • 4x Analog or Digital Inputs (12 Bits resolution)
      • 8x Outputs (Half Bridge, max. 3A per channel, PWM)
        • Built-in Current Sensor for output current monitoring
        • Adjustable output current limit from 0.5A to 3A
    • Cryptography: ECC608 Crypto Chip
    • Communication: RS485
    • Networking: Ethernet Port with W5500 from Wiznet
    ]]>         CONTROLLINO NEO https://www.controllino.com/product/controllino-neo/ Thu, 25 May 2023 12:05:41 +0000 https://page2023.controllino.com/product/controllino-neo/ 2X RP2040 32-BIT MICROCONTROLLERS Our NEO contains not one, but two RP2040 32-bit microcontrollers for maximum flexibility and parallelization. Fully Arduino-compatible and programmable with C, MicroPython and more. FLEXBILE TO THE CORE AND BEYOND 8 digital outputs, 4 digital inputs, 4 analog outputs and 8 digital outputs on the core. Want to use 0-10V/4-20mA analog I/O? Or digital I/O with your own thresholds? With NEO, nothing holds you back. PLUG & PLAY UPGRADES WITH EXTENSIONS The NEO is highly adaptable thanks to plug & play add-on modules that simply connect over RS485 & CAN bus. More I/Os, relays, edge computing, sensors… you name it, we have it (or build it). UNCOMPROMISED IOT SECURITY Every NEO includes a secure element (ECC608) for future-proof and secure Industrial IoT connectivity. Store certificates and keys, or use fast hardware-accelerated encryption and decryption. Launching in Q1. Pre-order now!]]> After shaking up the industrial automation industry with CONTROLLINO almost a decade ago, it was time to build something new. Something that is ready for the future of Industrial IoT and Automation. That’s why we have put in all our brainwork to build one device that fits it all. We call it CONTROLLINO NEO.

    2X RP2040 32-BIT MICROCONTROLLERS
    Our NEO contains not one, but two RP2040 32-bit microcontrollers for maximum flexibility and parallelization. Fully Arduino-compatible and programmable with C, MicroPython and more.

    FLEXBILE TO THE CORE AND BEYOND
    8 digital outputs, 4 digital inputs, 4 analog outputs and 8 digital outputs on the core. Want to use 0-10V/4-20mA analog I/O? Or digital I/O with your own thresholds? With NEO, nothing holds you back.

    PLUG & PLAY UPGRADES WITH EXTENSIONS
    The NEO is highly adaptable thanks to plug & play add-on modules that simply connect over RS485 & CAN bus. More I/Os, relays, edge computing, sensors… you name it, we have it (or build it).

    UNCOMPROMISED IOT SECURITY
    Every NEO includes a secure element (ECC608) for future-proof and secure Industrial IoT connectivity. Store certificates and keys, or use fast hardware-accelerated encryption and decryption.

    Launching in Q1. Pre-order now!

    ]]>         Screwless Terminal Block Plug (26 Position) https://www.controllino.com/product/screwless-terminal-block-plug-26-position/ Thu, 25 May 2023 12:05:41 +0000 https://page2023.controllino.com/product/screwless-terminal-block-plug-26-position/
  • Place the included pin header adapter into the pin headers. Push them slightly into This guarantees that you will use the right orientation.
  • Plug in the screwless terminal block plug into the pin header.
  • Push down the orange button and press the cable into the screwless terminal block plug.
    • ]]>     With our new screwless terminal block plugs, you are getting a way easier method of connecting wires to the pin headers, without the need to use classic jumper wire cable connectors. A pure cable is enough. Plus: The block plugs guarantee a high retention of the wire as well as optimal contact.

    The installation of the screwless terminal block plugs is easy too:

    • Place the included pin header adapter into the pin headers. Push them slightly into This guarantees that you will use the right orientation.
    • Plug in the screwless terminal block plug into the pin header.
    • Push down the orange button and press the cable into the screwless terminal block plug.
    ]]>         CONTROLLINO Training Kit https://www.controllino.com/product/controllino-training-kit/ Thu, 25 May 2023 12:05:41 +0000 https://page2023.controllino.com/product/controllino-training-kit/ The CONTROLLINO Training Kit is perfect for Controllino and PLC education, as well as training for learning, testing, and simulation. Perfectly suitable for IHK exam preparation or just for "learning by doing". The included exercises (in learning card format) support you from the creation of a program to the testing and validation of the functions. The available sensors on the Controllino training board can be switched on or off as required. Up to 8 push buttons / latching switches, 4 analogue value transmitters (0-10 Volt) and a pulse generator (2-1000 Hz, linear) are available. 8 LEDs and a buzzer serve as actuators. The set contains the following components:
    • Controllino Maxi Automation
    • Controllino Training Board
    • Interface Module Traffic Lights (Simulation of a traffic light control)
    • Interface Module 1 (for connecting external sensors, actuators and third-party modules)
    • 24V Power Supply
    • Case (industrial quality plastic case and foam with ESD protection)
    Available Lessons: PLC Training Level 100 (Beginner) T 100: AND, OR, NOT T 101: NAND, NOR, XOR T 102: Flip Flop, Impluse Relay T 103: On-Off-Delay T 104: Pulse Generator T 105: Cross Circuit T 106: Logical Connection PLC Training Level 200 (Basic) T 200: Patient Call T 201: Hall Light T 202: Ramp T 203: Direction of rotation control T 204: Star Delta Circuit T 205: Fill level monitoring T 206: Fill level monitoring 2 T 207: Logo Display T 208: Analog Value Display T 209: Servo Motor Control T 210: Pulse Duration Modulation T 211: Escalator PLC Training Level 300 (Advanced) T 300: Parking Lot T 301: Running Light T 302: Counter T 303: Crane T 304: Conveyor Belt T 305: Parking House T 306: Reverse Vending Machine T 307: Radiator T 308: Room Radiator T 309: House Radiator T 310: Awning Control]]>     The CONTROLLINO Training Kit is perfect for Controllino and PLC education, as well as training for learning, testing, and simulation. Perfectly suitable for IHK exam preparation or just for “learning by doing”.

    The included exercises (in learning card format) support you from the creation of a program to the testing and validation of the functions. The available sensors on the Controllino training board can be switched on or off as required. Up to 8 push buttons / latching switches, 4 analogue value transmitters (0-10 Volt) and a pulse generator (2-1000 Hz, linear) are available. 8 LEDs and a buzzer serve as actuators.

    The set contains the following components:

    • Controllino Maxi Automation
    • Controllino Training Board
    • Interface Module Traffic Lights (Simulation of a traffic light control)
    • Interface Module 1 (for connecting external sensors, actuators and third-party modules)
    • 24V Power Supply
    • Case (industrial quality plastic case and foam with ESD protection)

    Available Lessons:

    PLC Training Level 100 (Beginner)
    T 100: AND, OR, NOT
    T 101: NAND, NOR, XOR
    T 102: Flip Flop, Impluse Relay
    T 103: On-Off-Delay
    T 104: Pulse Generator
    T 105: Cross Circuit
    T 106: Logical Connection

    PLC Training Level 200 (Basic)
    T 200: Patient Call
    T 201: Hall Light
    T 202: Ramp
    T 203: Direction of rotation control
    T 204: Star Delta Circuit
    T 205: Fill level monitoring
    T 206: Fill level monitoring 2
    T 207: Logo Display
    T 208: Analog Value Display
    T 209: Servo Motor Control
    T 210: Pulse Duration Modulation
    T 211: Escalator

    PLC Training Level 300 (Advanced)
    T 300: Parking Lot
    T 301: Running Light
    T 302: Counter
    T 303: Crane
    T 304: Conveyor Belt
    T 305: Parking House
    T 306: Reverse Vending Machine
    T 307: Radiator
    T 308: Room Radiator
    T 309: House Radiator
    T 310: Awning Control

    ]]>         Phoenix Contact Relay Module – RIF-3-RPT-LDP-24DC/3X21 https://www.controllino.com/product/phoenix-contact-relay-module-rif-3-rpt-ldp-24dc-3x21/ Thu, 25 May 2023 12:05:41 +0000 https://page2023.controllino.com/product/phoenix-contact-relay-module-rif-3-rpt-ldp-24dc-3x21/ Pre-assembled relay module with push-in connection, consisting of: relay base, power contact relay, and retaining bracket. Contact type: 3 PDTs. Input voltage: 24 V DC. The pluggable electromechanical and solid-state relays in the RIFLINE complete product range and the base are recognized and approved in accordance with UL 508.

    ]]>         Screwless Terminal Block Plug (20 Position) https://www.controllino.com/product/screwless-terminal-block-plug-20-position/ Thu, 25 May 2023 12:05:41 +0000 https://page2023.controllino.com/product/screwless-terminal-block-plug-20-position/
  • Plug in the screwless terminal block plug into the pin header.
  • Push down the orange button and press the cable into the screwless terminal block plug.
    • ]]>     With our new screwless terminal block plugs, you are getting a way easier method of connecting wires to the pin headers, without the need to use classic jumper wire cable connectors. A pure cable is enough. Plus: The block plugs guarantee a high retention of the wire as well as optimal contact.

    The installation of the screwless terminal block plugs is easy too (for Controllino MEGA only!):

    • Plug in the screwless terminal block plug into the pin header.
    • Push down the orange button and press the cable into the screwless terminal block plug.
    ]]>         DIN Rail Mounting Replacement Part https://www.controllino.com/product/din-rail-mounting-replacement-part/ Thu, 25 May 2023 12:05:41 +0000 https://page2023.controllino.com/product/din-rail-mounting-replacement-part/
  • Including 2 Pieces
  • Easy and quick replacement if your DIN Rail Mounting is broken
    • Please check the product images for more information on replacement.]]>     Replacement Part for CONTROLLINO DIN Rail Mounting

    • Including 2 Pieces
    • Easy and quick replacement if your DIN Rail Mounting is broken

    Please check the product images for more information on replacement.

    ]]>         Phoenix Contact Relay Module – RIF-2-RPT-LDP-24DC/4X21 https://www.controllino.com/product/phoenix-contact-relay-module-rif-2-rpt-ldp-24dc-4x21/ Thu, 25 May 2023 12:05:41 +0000 https://page2023.controllino.com/product/phoenix-contact-relay-module-rif-2-rpt-ldp-24dc-4x21/ Pre-assembled relay module with push-in connection, consisting of: relay base, power contact relay, and retaining bracket. Contact type: 2 PDTs. Input voltage: 24 V DC. The pluggable electromechanical and solid-state relays in the RIFLINE complete product range and the base are recognized and approved in accordance with UL 508.

    ]]>         CONTROLLINO MAXI Automation pure https://www.controllino.com/product/controllino-maxi-automation-pure/ Thu, 25 May 2023 12:04:43 +0000 https://page2023.controllino.com/product/controllino-maxi-automation-pure/ Presenting the CONTROLLINO MAXI Automation, a specialized variant of the CONTROLLINO MAXI, purpose-built for automation experts requiring 0-10V I/Os. This model upholds the ideal balance of compact design and significant I/O capacity that the MAXI is known for. The core strength of the MAXI Automation is its versatility. Please note, this model operates exclusively with a 24V DC power supply.

    ]]>